Log: retract tower spacing claim — side-by-side wing frames are sheet layout

The 'combined ground plan' frame is a pure-text notes region, F1's 70m of
walls cannot hold two 49m towers, and each wing title owns its own frame:
the standard-floor region lays A座/B座 side by side, so the 38m frame gap
is SHEET spacing, not building geometry (the 104m clip was wall-bbox
refinement swallowing the neighbour frame). True wing spacing must come
from a single frame containing both wings (A-03 basement shafts or a bound
site plan). floors_aligned has a blind spot for this shape — candidate
hardening: explicit anchor_frame for multi-wing configs.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
This commit is contained in:
2026-07-02 22:03:34 +08:00
parent 39528b38e9
commit 2ab16dab34

View File

@@ -98,12 +98,20 @@ clip 合并——**该能力已存在**:floor_specs 为列表、buckets 按 ke
线段原样通过。回归:40m 框内 140m 穿越线裁到框宽。贝昂框距大未暴露此坑,
图框密排的图集必踩。
13号 一号楼当前状态(round 3):标准层双塔(F4~F10,union-clip 单条目)+
机房/屋顶(塔芯居中/女儿墙 bbox 锚定,两翼 offset 自洽性 50mm)已对齐,
audit 三门禁 PASS,GLB 双塔顶视形态正确(间距 85.8m)。**未决**:F1~F3
裙房与塔楼错位——F1 框仅 88m 宽盖不住 135m 双塔,一层疑似也是分区图
(另一分区待在 45 候选框或 A-03 地库图集中确认);下一轮先解裙房分区,
再做叠图逐层核验与 viewer 目检。
13号 一号楼 round 3 结论(含一次重要撤回):
- 有效产出:标准层/机房/屋顶的框内提取与 clip 裁剪干净,audit 三门禁
PASS,GLB 双塔形态正确。
- **撤回**:"双塔间距 85.8m"不可信——后续证据链("地下各层及一层平面图"
大框实为纯文字说明区、F1 仅 70m 墙容不下两个 49m 塔、A/B 座标题各踞一个
并排图框)表明标准层区域是 **A/B 座并排排版**,38m 框间隙是排版间距,
不是建筑几何;__2 的 104m 宽 clip 是墙 bbox 精修吞并邻框的检测伪影。
- **教训(多座建筑通则)**:翼间真实位置只能由"同一图框内含双翼"的图纸
锚定(本例候选:A-03 地库的塔楼竖井、绑定 XREF 后的总图);并排图框的
间距永远不可当作建筑间距。floors_aligned 门禁对该形态存在盲区(多座
merge 后包络中心检查无法发现翼间距错误),候选加固:多座配置要求显式
anchor_frame 或跨框共有几何校验。
- 下一轮:先提取 A-03 地库(6,877 实体、16 框)拿到双塔竖井真实间距,
再回填一号楼翼位与裙房分区,最后叠图核验 + viewer 目检。
(待续)