detect_sheet_frames: axis ticks vote like grid lines; expanded axis window

Two vote-killers found on 13号地块 towers: axis geometry sits OUTSIDE the
wall-tight clip (stubs beyond the facade), and min_grid_len = pitch*0.25
discarded 0.8m axis-number ticks outright. Axis candidates are now
collected in a pitch*0.16-expanded window, and strictly axis-parallel
stubs (pitch*0.004..0.05) count alongside full-span lines — same-position
ticks cluster into one vote. Synthetic tick fixture goes WEAK -> full votes.

Honest finding logged: the 13号 tower frames genuinely contain NO axis
geometry (all 249 ticks belong to other frames), so votes=0 is the correct
verdict there — modeling proceeds via clip-corner fallback plus mandatory
per-floor overlay verification; wall-position correlation noted as the
future alignment source when axes are absent.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
This commit is contained in:
2026-07-02 21:42:03 +08:00
parent 12ddc9488d
commit bccc9f41d6
3 changed files with 55 additions and 14 deletions

View File

@@ -72,10 +72,16 @@
默认 axis-layers 是精确 token(AXIS/DOTE),该院所有图层带 `A_` 前缀
→ votes 全 0 落 clip 角点兜底。修复:默认 pattern 加通配
(`*AXIS*,*DOTE*`),回归用例 rowframe 加 layer_prefix="A_" 变体。
**未决(下一轮)**:13号 塔楼修正后仍 0 票(仅 y=1)——A_AXIS 745 条
存在但不进投票,疑似轴号短引线(非跨图长线)或 wall-bbox 精修 clip
裁掉轴线区,需检查 segments_in 的窗口语义;当前 44 框全靠 clip 角点
兜底,标准层间 offset 有 9m 级差异,须按 DoD 用叠图逐层核验后才可建模。
后续排查(同轮完成):A_AXIS 全部是 0.7-1.5m 轴号刻线(角度 0/90° 精确)
且位于墙 bbox 之外——两处投票杀手都已修:轴线收集窗口外扩
(pitch×0.16)、接受短刻线为网格候选(tick_min/tick_max = pitch×0.004
/0.05,同位刻线聚簇即一票;合成 tick 用例从 WEAK 变满票)。
**但 13号 塔楼框实测仍 0 票且这是正确结论**:249 根刻线全部属于其他
框(地下分区图),一层/二层/标准层框内没有任何轴线几何。此时只能走
DoD 逃生通道:clip 角点兜底 + 叠图逐层核验。注意 clip 角点锚的是墙
bbox 最小角,随内容而变(标准层 268914 vs RF 259914 差 9m = 阳台/
露台外扩差异,贝昂 B1 式陷阱)——候选改进:轴线缺失时改用墙体位置
互相关(wall-correlation)做对齐,待下一轮设计。
13号 一号楼已完成的判读(供下一轮直接使用):办公 A/B 双塔 + 3 层裙房;
层高表(平面文件标高直方图 + "地上10层"说明):F1=0/6.0、F2=6.0/6.0、