detect_sheet_frames: axis ticks vote like grid lines; expanded axis window

Two vote-killers found on 13号地块 towers: axis geometry sits OUTSIDE the
wall-tight clip (stubs beyond the facade), and min_grid_len = pitch*0.25
discarded 0.8m axis-number ticks outright. Axis candidates are now
collected in a pitch*0.16-expanded window, and strictly axis-parallel
stubs (pitch*0.004..0.05) count alongside full-span lines — same-position
ticks cluster into one vote. Synthetic tick fixture goes WEAK -> full votes.

Honest finding logged: the 13号 tower frames genuinely contain NO axis
geometry (all 249 ticks belong to other frames), so votes=0 is the correct
verdict there — modeling proceeds via clip-corner fallback plus mandatory
per-floor overlay verification; wall-position correlation noted as the
future alignment source when axes are absent.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
This commit is contained in:
2026-07-02 21:42:03 +08:00
parent 12ddc9488d
commit bccc9f41d6
3 changed files with 55 additions and 14 deletions

View File

@@ -181,11 +181,14 @@ def make_blockgrid_dxf(path: Path) -> None:
doc.saveas(path)
def make_rowframe_dxf(path: Path, layer_prefix: str = "") -> None:
def make_rowframe_dxf(path: Path, layer_prefix: str = "", grid_style: str = "lines") -> None:
"""Row layout (3#辅房 pattern): frames side by side, pitch on X, titles same row.
layer_prefix simulates design institutes that prefix every layer
(13号地块: A_WALL/A_DOTE) — exact-token axis patterns then miss the grid.
grid_style="ticks" draws 0.8 m axis-number stubs just OUTSIDE the wall
bbox instead of full-span grid lines (13号: no through grids at all) —
tick positions still fingerprint the grid for correlation.
"""
doc = ezdxf.new("R2010", setup=True)
wall_layer = f"{layer_prefix}WALL"
@@ -203,12 +206,20 @@ def make_rowframe_dxf(path: Path, layer_prefix: str = "") -> None:
((2000, 12000), (6000, 12000))]
for (sx, sy), (ex, ey) in outline + interior:
msp.add_line((sx + ox, sy), (ex + ox, ey), dxfattribs={"layer": wall_layer})
for i in range(3):
x = i * 4000
msp.add_line((x + ox, -2500), (x + ox, 18500), dxfattribs={"layer": grid_layer})
for j in range(4):
y = j * 5000
msp.add_line((-2500 + ox, y), (10500 + ox, y), dxfattribs={"layer": grid_layer})
if grid_style == "ticks":
for x in (0, 2600, 4000, 8000): # varied bays; stubs beyond the wall bbox
msp.add_line((x + ox, -3200), (x + ox, -2400), dxfattribs={"layer": grid_layer})
msp.add_line((x + ox, 16400), (x + ox, 17200), dxfattribs={"layer": grid_layer})
for y in (0, 3400, 5000, 11000):
msp.add_line((-3200 + ox, y), (-2400 + ox, y), dxfattribs={"layer": grid_layer})
msp.add_line((8400 + ox, y), (9200 + ox, y), dxfattribs={"layer": grid_layer})
else:
for i in range(3):
x = i * 4000
msp.add_line((x + ox, -2500), (x + ox, 18500), dxfattribs={"layer": grid_layer})
for j in range(4):
y = j * 5000
msp.add_line((-2500 + ox, y), (10500 + ox, y), dxfattribs={"layer": grid_layer})
msp.add_text(title, height=700, dxfattribs={"layer": "PUB_TEXT"}).set_placement((2500 + ox, -5200))
draw_frame(0.0, "一层平面图")
@@ -417,6 +428,21 @@ def main() -> int:
ok_pref = "F2" in pref_off and abs(pref_off["F2"][0] + 21000.0) <= 120 and "WEAK" not in pref_md
check("prefixed A_DOTE grid still votes", ok_pref, f"{pref_off} weak={'WEAK' in pref_md}")
# tick-style grids (13号: 0.8m axis stubs outside the wall bbox, no through lines)
make_rowframe_dxf(row_dir / "rowframes_ticks.dxf", grid_style="ticks")
proc = run([
sys.executable, "scripts/detect_sheet_frames.py",
"--dxf", str(row_dir / "rowframes_ticks.dxf"), "--out-config", str(WORK / "frames_ticks.json"),
"--out-report", str(WORK / "frames_ticks.md"), "--vendor-dir", str(VENDOR),
])
check("detect handles tick grids", proc.returncode == 0, proc.stderr[-400:])
if proc.returncode == 0:
frames_ticks = json.loads((WORK / "frames_ticks.json").read_text(encoding="utf-8"))
tick_off = {f["key"]: f["offset"] for f in frames_ticks["drawings"][0]["floors"]}
tick_md = (WORK / "frames_ticks.md").read_text(encoding="utf-8")
ok_ticks = "F2" in tick_off and abs(tick_off["F2"][0] + 21000.0) <= 120 and "WEAK" not in tick_md
check("axis ticks vote like grid lines", ok_ticks, f"{tick_off} weak={'WEAK' in tick_md}")
# --- merge_wall_solids: shapely union of wall segments (spec_to_glb) ---
sys.path.insert(0, str(ROOT / "scripts"))
import spec_to_glb # noqa: E402