fix: close remaining CAD delivery review gaps
This commit is contained in:
@@ -78,7 +78,7 @@ CAD 把幕墙画成稀疏分格板(实测 8F:1.42m 板 / 每 4.5m 一块 /
|
||||
|
||||
### 3.3 柱头封顶(比 `shorten_unsupported_columns` 更好)
|
||||
现有的“无支撑柱缩短”会产生突兀的 1.2m 矮柱。更自然的做法是**生成盖板**:
|
||||
- 地上退台层:`cap = 本层footprint(外扩~1.3m) − 上层footprint`,在 `z+h` 处挤薄板(退台屋面/雨棚)。外扩是为了盖住凹包络切掉的外圈柱廊柱。
|
||||
- 地上退台层:`cap = 本层footprint(外扩cap_buffer) − 上层footprint`,在 `z+h` 处挤薄板(退台屋面/雨棚)。普通立面默认 `0.1m`;A208 的外圈柱廊有图纸佐证,才显式使用约 `1.3m`。
|
||||
- **地下室顶层**:直接把整层 footprint 在 z=0 封成地面/顶板(停车区上方的地坪)。
|
||||
- 顶层(8F)/辅楼顶:用现有 `roof_specs` 屋顶盖。
|
||||
|
||||
|
||||
@@ -211,7 +211,7 @@ Review `building_spec.json` before rendering:
|
||||
- Segment counts are not dominated by dimensions/hatches/annotations.
|
||||
- Footprint polygons exist when slabs/roofs are meant to follow CAD floor plates.
|
||||
- `default_disabled_categories` does not hide `slab` for presentation/digital-twin views.
|
||||
- Generated cap edges do not protrude as slab fins. The historical `cap_buffer=1.3m` value fits colonnade/overhang cases; use about `0.1m` for ordinary facade-aligned floors, then confirm front/side views.
|
||||
- Generated cap edges do not protrude as slab fins. `cap_buffer` defaults to `0.1m` for ordinary facade-aligned floors. Set it explicitly around `1.3m` only for evidenced colonnade/overhang cases such as A208, then confirm front/side views.
|
||||
|
||||
## 6. Agent Audit and Overlay Review
|
||||
|
||||
|
||||
Reference in New Issue
Block a user