Files
cad-building-showcase/references/multi_frame_tarch.md

3.7 KiB
Raw Blame History

Multi-Frame Sheets and TArch/天正

Contents

  1. Detecting sheet walls
  2. Alignment evidence
  3. Titles and storeys
  4. Clip risks
  5. TArch mapping preset

Detecting Sheet Walls

Chinese architectural DWGs often place all plans, elevations, sections, and details in one modelspace. Run detect_sheet_frames.py; never model the whole file as one floor.

The detector:

  • scans plan titles in modelspace and cached blocks;
  • rejects catalog/title-block copies and auxiliary titles;
  • prefers title-block INSERT bboxes over pitch-only windows;
  • expands enumerated/ranged titles such as 三、五层 and 十一至十四层;
  • emits a config skeleton plus a Markdown evidence report.

Pass every detector output config to audit with --frames. Account for every detected plan frame in extraction config or discarded_frames with a nonempty reason.

The detector emits sheet-level proposals. Two different plan titles can sit inside one title-block/frame INSERT and therefore receive the same broad clip (for example 一层平面图 plus 夹层平面图, or 二层平面图 plus 十六层平面图). Never duplicate that shared clip across floors. Split it at the wall-cluster gap between title positions, then recompute each floor offset. Use independent declared area/storey evidence to prove the split; a roughly 2× footprint is the characteristic failure signal.

Alignment Evidence

Prefer structural-grid voting. TArch grids often live on DOTE, not AXIS. When through grids are absent, accept tick-grid voting. When no axes exist, use wall-profile correlation independently in X/Y. Use clip-corner anchoring only as a weak fallback.

Require overlay review for WEAK grid match and wall-correlated results. The audit cross-floor datum gate must reject a strong correlation peak at a nonzero shift; envelope centers alone cannot detect a floor placed into the wrong tower slot.

Never stack frames without offsets. That preserves sheet-layout pitch and creates the classic diagonal staircase building.

Titles and Storeys

Read per-frame elevation ladders from section/elevation frames, but treat suggested storey tables as evidence rather than truth. Stair sections can contain half-storey rhythms; podium, machine-room, and roof heights differ.

Set explicit z, height, and floor_order. The schema rejects floor-order gaps and ghost keys.

Clip Risks

Title-block or refined clips can still swallow adjacent rows, details, legends, or revision tables. Investigate when a footprint dimension is 2-4x its siblings, exceeds declared area, or contains distant sliver polygons. Tighten both X/Y clip bands or use evidence-backed isolated-cluster filtering; do not simply raise noise thresholds until the artifact disappears. Inspect the final browser screenshot too: repeated floating strips at every storey usually mean off-envelope plan symbols survived the clip.

TArch Mapping Preset

Start consciously from this calibration, then inspect actual top layers:

  • walls: WALL, *WALL*, *墙*
  • columns: COLUMN, *COL*
  • glazing: CURTWALL, *GLAZ*, *幕墙*, *玻璃*
  • roof: 屋面, *屋顶*
  • detail: STAIR, EVTR, 平面, 开口
  • grid: DOTE, AXIS

Doors/windows may both be INSERTs on WINDOW, with leaf geometry on layer 0. Use block-name classification:

{
  "expand_blocks": ["$TCHSYS$*", "$DorLib2D$*"],
  "block_name_categories": {
    "glazing": ["$TCHSYS$WIN2D*"],
    "doors": ["$DorLib2D$*"]
  }
}

Exclude annotation/frame layers such as *-IDEN, *图签*, PUB_*, DIM_*, *TEXT*, 面积核算, 格子线, SEC-*, 立面, 剖面, 家具. TArch column fills can be HATCH-only; pull structure from the structural drawing set instead of inventing columns.