- detect_sheet_frames: title-block INSERTs (A0_V1/A0+0.5_V1/*图框*) define the
clip window when they contain the title — pitch windows halved elongated
sheets (13号 加长A0, one frame holding both towers); wall refine is clamped
inside the frame rect; 13号 b1 real data: all 45 frames rect-clipped
- audit floors_aligned: cross-floor wall-profile datum check catches
"self-consistent but misplaced" floors (13号 F3 错槽 85.8m that envelope
centers PASSed); zero-shift guard kills the dense-podium false positive
(27号 1#A PH matched "better" 1.5m off while already fitting in place)
- 门卫 size mismatch root-caused as representation granularity (gate compound
vs kiosk symbol), not an extraction bug — closed in the log
- regression suite +6 checks (titleblock / crossdatum bad+good), all three
projects re-audited with no false positives
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
concave_hull over all points cannot split disconnected masses: 13号 一号楼
standard floors (A/B towers in one floor key) got ONE 135.6m hull and
use_footprint_slabs laid plates across the 36m void (user-visible as
"triangular links" between towers). Points are now union-find clustered
(footprint_cluster_linkage, 6m grid buckets; segment endpoints forced into
one cluster) and hulled per cluster — real link bridges keep clusters
merged via their walls. F4-F10 now 2x49.8m hulls matching the site-plan
OBB; 黄桥/27号 re-derived with no regression; DoD visual check extended
(look at the AIR between masses in front/side views). Regression: twintower
scenario (+3 checks).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
X-00-0011 (site plan) holds 5,306 entities and X-01-0200 (elevations)
4,443 as ordinary block definitions; modelspace only has the INSERT stub,
so the report's msp-count flagged near_empty. libredwg drops the xref
flag, ODA keeps xref_path with flags=0 — either way expand_blocks IS the
bind. Site plan is metric surveying coords (55km/57km) with bound-prefix
layers (X-00-0011$0$...) and 40 DIM_COOR callouts. Next round: teach the
report to flag cached-xref blocks instead of asking for re-exports, scan
block content for frame titles, and anchor the tower wings from the dx
outlines + coordinate callouts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Both small buildings pass the pipeline (gatehouse all gates PASS; substation
glazing legitimately SKIP, and drop_unsupported_roof_lines auto-removed 43m
of elevation-frame bleed — first organic catch on a new project). The site
plan carries 104 DIM_COOR coordinate callouts, so plot-27 placement needs no
external data. Remaining: the three big building sets, site manifest,
campus assembly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The 平时平面 anchor candidate in the garage set is an empty shell (15
lines); zone B1_2 carries real walls/stairs/columns but spans one 40m
strip. Zone stitching is mechanically ready (repeated keys + clip trim);
if the stitched garage still lacks both tower shafts, the bound-XREF site
plan / elevations must come from the user (A-00 and 200-299 are shells).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The 'combined ground plan' frame is a pure-text notes region, F1's 70m of
walls cannot hold two 49m towers, and each wing title owns its own frame:
the standard-floor region lays A座/B座 side by side, so the 38m frame gap
is SHEET spacing, not building geometry (the 104m clip was wall-bbox
refinement swallowing the neighbour frame). True wing spacing must come
from a single frame containing both wings (A-03 basement shafts or a bound
site plan). floors_aligned has a blind spot for this shape — candidate
hardening: explicit anchor_frame for multi-wing configs.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Membership by midpoint/endpoint kept whole segments, so long table borders
and annotation rules carried the full sheet width into a floor — 13号's 56m
frame emitted 143m of geometry and footprint hulls grew stray plates.
Segments are now clipped to the frame rect; fully-inside geometry passes
through unchanged. Regression: a 140m line crossing a 40m frame comes out
frame-wide. Dense sheet layouts hit this; 贝昂's wide frame pitch never did.
Round-3 log: tower-1 twin towers aligned and gated (union-clip standard
floors; PH centered on cores, RF parapet bbox-anchored, wing offsets
self-consistent to 50mm); podium F1-F3 zoning still open.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two vote-killers found on 13号地块 towers: axis geometry sits OUTSIDE the
wall-tight clip (stubs beyond the facade), and min_grid_len = pitch*0.25
discarded 0.8m axis-number ticks outright. Axis candidates are now
collected in a pitch*0.16-expanded window, and strictly axis-parallel
stubs (pitch*0.004..0.05) count alongside full-span lines — same-position
ticks cluster into one vote. Synthetic tick fixture goes WEAK -> full votes.
Honest finding logged: the 13号 tower frames genuinely contain NO axis
geometry (all 249 ticks belong to other frames), so votes=0 is the correct
verdict there — modeling proceeds via clip-corner fallback plus mandatory
per-floor overlay verification; wall-position correlation noted as the
future alignment source when axes are absent.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
13号地块 prefixes every layer (A_DOTE/A_AXIS/A_WALL); the exact-token
axis defaults silently zeroed grid-correlation votes for all 44 frames.
Defaults now *AXIS*/*DOTE*; rowframe fixture gains a layer_prefix="A_"
variant asserting the grid still votes (no WEAK).
Logged open item: the tower sheets still vote 0 after the pattern fix —
axis stubs vs full-span grid lines or clip-window semantics, to debug next
round; plus the plot-13 storey table and the finding that per-floor
multi-clip stitching already works via repeated floor keys.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ODA auto-fallback validated at scale: plot-13 18/18 files ok (8 rescued),
plot-27 13/13 ok (9 rescued) — previously 9 failed + 8 empty-modelspace
main sheets. Documented the next structural gaps found in plot-13's tower
sheets: multi-wing (座) title prefixes stored as separate text entities,
zoned per-level plans needing multi-clip stitching (one clip per floor today),
and typical-floor (标准层) replication; elevations and site plan are unbound
XREF shells, so storey heights need another source.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Conversion/encoding chain (libredwg on Chinese TArch DWGs):
- run_dwg2dxf: capture bytes, decode leniently (GBK console output crashed
the batch under subprocess text=True)
- sanitize_dxf_comments: byte-level, code/value pair walk — the UTF-8
errors="ignore" round-trip mangled every GBK CJK string ("一层平面图"
-> "一平图") and eating XRECORD "999" VALUE lines corrupted files
- read_doc: recover fallback also on ValueError; scrub_surrogates keeps one
corrupt drawing from killing the whole report
- decode_mif in report + frame detector: \M+5XXXX escapes (whole 黄桥 set)
restored so plan-title detection works at all
- ODA auto-fallback: reconvert DWGs whose libredwg DXF fails inspection or
reads an empty modelspace (黄桥 plans: 0 entities via dwg2dxf, 21k via
ODA); env ODA_CONVERTER override, fake-converter regression test
Frame detection:
- detect_sheet_frames expands INSERTs (memoized, depth<=3) when collecting
axis/wall lines — 黄桥 wraps each frame's grid in anonymous A$C... blocks
(msp had 8 DOTE lines, blocks held 700); all 7 frames went from WEAK
clip-corner fallback to grid-aligned votes x=14
Extraction judgment rules (both loud, both default-on, both switchable):
- drop_isolated_clusters: tiny segment clusters far from the main mass are
sheet-legend content drawn on real layers (title-block window symbols made
every floor's footprint grow a sliver fin)
- drop_unsupported_roof_lines: roof outlines with no footprint/cap plate
within 2m beneath are hatch-only-support canopies that extrude into
floating ribbons (F3 SW 坡屋面, B1 ground canopy at -5.85m)
Tests: 64 -> 75 checks, incl. GBK/MIF synthetic DXFs, block-wrapped grid
alignment (non-uniform bays — uniform grids make subset correlation
ambiguous), legend-cluster and unsupported-roof fixtures.
references/generalization_test_log.md tracks the test protocol, per-project
gate table, and every gap with its regression coverage.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>