Files
cad-building-showcase/references/multi_frame_tarch.md

69 lines
3.7 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Multi-Frame Sheets and TArch/天正
## Contents
1. Detecting sheet walls
2. Alignment evidence
3. Titles and storeys
4. Clip risks
5. TArch mapping preset
## Detecting Sheet Walls
Chinese architectural DWGs often place all plans, elevations, sections, and details in one modelspace. Run `detect_sheet_frames.py`; never model the whole file as one floor.
The detector:
- scans plan titles in modelspace and cached blocks;
- rejects catalog/title-block copies and auxiliary titles;
- prefers title-block INSERT bboxes over pitch-only windows;
- expands enumerated/ranged titles such as `三、五层` and `十一至十四层`;
- emits a config skeleton plus a Markdown evidence report.
Pass every detector output config to audit with `--frames`. Account for every detected plan frame in extraction config or `discarded_frames` with a nonempty reason.
The detector emits sheet-level proposals. Two different plan titles can sit inside one title-block/frame INSERT and therefore receive the same broad clip (for example `一层平面图` plus `夹层平面图`, or `二层平面图` plus `十六层平面图`). Never duplicate that shared clip across floors. Split it at the wall-cluster gap between title positions, then recompute each floor offset. Use independent declared area/storey evidence to prove the split; a roughly 2× footprint is the characteristic failure signal.
## Alignment Evidence
Prefer structural-grid voting. TArch grids often live on `DOTE`, not `AXIS`. When through grids are absent, accept tick-grid voting. When no axes exist, use wall-profile correlation independently in X/Y. Use clip-corner anchoring only as a weak fallback.
Require overlay review for `WEAK grid match` and `wall-correlated` results. The audit cross-floor datum gate must reject a strong correlation peak at a nonzero shift; envelope centers alone cannot detect a floor placed into the wrong tower slot.
Never stack frames without offsets. That preserves sheet-layout pitch and creates the classic diagonal staircase building.
## Titles and Storeys
Read per-frame elevation ladders from section/elevation frames, but treat suggested storey tables as evidence rather than truth. Stair sections can contain half-storey rhythms; podium, machine-room, and roof heights differ.
Set explicit `z`, `height`, and `floor_order`. The schema rejects floor-order gaps and ghost keys.
## Clip Risks
Title-block or refined clips can still swallow adjacent rows, details, legends, or revision tables. Investigate when a footprint dimension is 2-4x its siblings, exceeds declared area, or contains distant sliver polygons. Tighten both X/Y clip bands or use evidence-backed isolated-cluster filtering; do not simply raise noise thresholds until the artifact disappears. Inspect the final browser screenshot too: repeated floating strips at every storey usually mean off-envelope plan symbols survived the clip.
## TArch Mapping Preset
Start consciously from this calibration, then inspect actual top layers:
- walls: `WALL`, `*WALL*`, `*墙*`
- columns: `COLUMN`, `*COL*`
- glazing: `CURTWALL`, `*GLAZ*`, `*幕墙*`, `*玻璃*`
- roof: `屋面`, `*屋顶*`
- detail: `STAIR`, `EVTR`, `平面`, `开口`
- grid: `DOTE`, `AXIS`
Doors/windows may both be INSERTs on `WINDOW`, with leaf geometry on layer `0`. Use block-name classification:
```json
{
"expand_blocks": ["$TCHSYS$*", "$DorLib2D$*"],
"block_name_categories": {
"glazing": ["$TCHSYS$WIN2D*"],
"doors": ["$DorLib2D$*"]
}
}
```
Exclude annotation/frame layers such as `*-IDEN`, `*图签*`, `PUB_*`, `DIM_*`, `*TEXT*`, `面积核算`, `格子线`, `SEC-*`, `立面`, `剖面`, `家具`. TArch column fills can be HATCH-only; pull structure from the structural drawing set instead of inventing columns.