Commit Graph

13 Commits

Author SHA1 Message Date
07e3c12956 Log: plot-13 above-ground complete — hotel tower extracted, campus assembled from site-plan anchors
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 23:22:41 +08:00
967a8a24f5 Log: plot-13 tower block re-anchored — shared-origin + wall-profile correlation; site plan proves 85.8m twin spacing
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 23:10:41 +08:00
f0b225b80e Log: plot-13 unblocked — xref content is CACHED inside the delivered DWGs
X-00-0011 (site plan) holds 5,306 entities and X-01-0200 (elevations)
4,443 as ordinary block definitions; modelspace only has the INSERT stub,
so the report's msp-count flagged near_empty. libredwg drops the xref
flag, ODA keeps xref_path with flags=0 — either way expand_blocks IS the
bind. Site plan is metric surveying coords (55km/57km) with bound-prefix
layers (X-00-0011$0$...) and 40 DIM_COOR callouts. Next round: teach the
report to flag cached-xref blocks instead of asking for re-exports, scan
block content for frame titles, and anchor the tower wings from the dx
outlines + coordinate callouts.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 22:29:20 +08:00
778f6b0b5d Log: plot-27 gatehouse + substation end-to-end; site plan has DIM_COOR anchors
Both small buildings pass the pipeline (gatehouse all gates PASS; substation
glazing legitimately SKIP, and drop_unsupported_roof_lines auto-removed 43m
of elevation-frame bleed — first organic catch on a new project). The site
plan carries 104 DIM_COOR coordinate callouts, so plot-27 placement needs no
external data. Remaining: the three big building sets, site manifest,
campus assembly.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 22:19:43 +08:00
d7cb3a2151 Log: plot-13 basement is zoned too; anchor hunt continues next round
The 平时平面 anchor candidate in the garage set is an empty shell (15
lines); zone B1_2 carries real walls/stairs/columns but spans one 40m
strip. Zone stitching is mechanically ready (repeated keys + clip trim);
if the stitched garage still lacks both tower shafts, the bound-XREF site
plan / elevations must come from the user (A-00 and 200-299 are shells).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 22:07:49 +08:00
2ab16dab34 Log: retract tower spacing claim — side-by-side wing frames are sheet layout
The 'combined ground plan' frame is a pure-text notes region, F1's 70m of
walls cannot hold two 49m towers, and each wing title owns its own frame:
the standard-floor region lays A座/B座 side by side, so the 38m frame gap
is SHEET spacing, not building geometry (the 104m clip was wall-bbox
refinement swallowing the neighbour frame). True wing spacing must come
from a single frame containing both wings (A-03 basement shafts or a bound
site plan). floors_aligned has a blind spot for this shape — candidate
hardening: explicit anchor_frame for multi-wing configs.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 22:03:34 +08:00
39528b38e9 derive: trim segments to the frame clip (Liang-Barsky)
Membership by midpoint/endpoint kept whole segments, so long table borders
and annotation rules carried the full sheet width into a floor — 13号's 56m
frame emitted 143m of geometry and footprint hulls grew stray plates.
Segments are now clipped to the frame rect; fully-inside geometry passes
through unchanged. Regression: a 140m line crossing a 40m frame comes out
frame-wide. Dense sheet layouts hit this; 贝昂's wide frame pitch never did.

Round-3 log: tower-1 twin towers aligned and gated (union-clip standard
floors; PH centered on cores, RF parapet bbox-anchored, wing offsets
self-consistent to 50mm); podium F1-F3 zoning still open.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 22:01:20 +08:00
bccc9f41d6 detect_sheet_frames: axis ticks vote like grid lines; expanded axis window
Two vote-killers found on 13号地块 towers: axis geometry sits OUTSIDE the
wall-tight clip (stubs beyond the facade), and min_grid_len = pitch*0.25
discarded 0.8m axis-number ticks outright. Axis candidates are now
collected in a pitch*0.16-expanded window, and strictly axis-parallel
stubs (pitch*0.004..0.05) count alongside full-span lines — same-position
ticks cluster into one vote. Synthetic tick fixture goes WEAK -> full votes.

Honest finding logged: the 13号 tower frames genuinely contain NO axis
geometry (all 249 ticks belong to other frames), so votes=0 is the correct
verdict there — modeling proceeds via clip-corner fallback plus mandatory
per-floor overlay verification; wall-position correlation noted as the
future alignment source when axes are absent.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 21:42:03 +08:00
12ddc9488d detect_sheet_frames: wildcard axis-layer defaults (prefixed-layer institutes)
13号地块 prefixes every layer (A_DOTE/A_AXIS/A_WALL); the exact-token
axis defaults silently zeroed grid-correlation votes for all 44 frames.
Defaults now *AXIS*/*DOTE*; rowframe fixture gains a layer_prefix="A_"
variant asserting the grid still votes (no WEAK).

Logged open item: the tower sheets still vote 0 after the pattern fix —
axis stubs vs full-span grid lines or clip-window semantics, to debug next
round; plus the plot-13 storey table and the finding that per-floor
multi-clip stitching already works via repeated floor keys.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 21:36:01 +08:00
d1ea460042 Generalization round 2 progress: plot-13/27 read stage complete via ODA fallback
ODA auto-fallback validated at scale: plot-13 18/18 files ok (8 rescued),
plot-27 13/13 ok (9 rescued) — previously 9 failed + 8 empty-modelspace
main sheets. Documented the next structural gaps found in plot-13's tower
sheets: multi-wing (座) title prefixes stored as separate text entities,
zoned per-level plans needing multi-clip stitching (one clip per floor today),
and typical-floor (标准层) replication; elevations and site plan are unbound
XREF shells, so storey heights need another source.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 21:28:40 +08:00
221626b1c7 Generalization hardening from test3d-7 round 1 (黄桥文体中心): 8 gap fixes
Conversion/encoding chain (libredwg on Chinese TArch DWGs):
- run_dwg2dxf: capture bytes, decode leniently (GBK console output crashed
  the batch under subprocess text=True)
- sanitize_dxf_comments: byte-level, code/value pair walk — the UTF-8
  errors="ignore" round-trip mangled every GBK CJK string ("一层平面图"
  -> "一平图") and eating XRECORD "999" VALUE lines corrupted files
- read_doc: recover fallback also on ValueError; scrub_surrogates keeps one
  corrupt drawing from killing the whole report
- decode_mif in report + frame detector: \M+5XXXX escapes (whole 黄桥 set)
  restored so plan-title detection works at all
- ODA auto-fallback: reconvert DWGs whose libredwg DXF fails inspection or
  reads an empty modelspace (黄桥 plans: 0 entities via dwg2dxf, 21k via
  ODA); env ODA_CONVERTER override, fake-converter regression test

Frame detection:
- detect_sheet_frames expands INSERTs (memoized, depth<=3) when collecting
  axis/wall lines — 黄桥 wraps each frame's grid in anonymous A$C... blocks
  (msp had 8 DOTE lines, blocks held 700); all 7 frames went from WEAK
  clip-corner fallback to grid-aligned votes x=14

Extraction judgment rules (both loud, both default-on, both switchable):
- drop_isolated_clusters: tiny segment clusters far from the main mass are
  sheet-legend content drawn on real layers (title-block window symbols made
  every floor's footprint grow a sliver fin)
- drop_unsupported_roof_lines: roof outlines with no footprint/cap plate
  within 2m beneath are hatch-only-support canopies that extrude into
  floating ribbons (F3 SW 坡屋面, B1 ground canopy at -5.85m)

Tests: 64 -> 75 checks, incl. GBK/MIF synthetic DXFs, block-wrapped grid
alignment (non-uniform bays — uniform grids make subset correlation
ambiguous), legend-cluster and unsupported-roof fixtures.
references/generalization_test_log.md tracks the test protocol, per-project
gate table, and every gap with its regression coverage.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 21:23:20 +08:00
6ace84ffba Campus pipeline hardening: backend parity, wall union, mullion grids, Draco tooling
Sandbox round (Linux):
- detect_sheet_frames.py: multi-frame sheet splitter (column AND row layouts),
  grid-vote per-floor offsets, section-elevation harvesting for storey heights
- dwg_dump_json.mjs + dwgjson_to_dxf.py: WASM libredwg DWG->DXF fallback
  (blocks/INSERT preserved, ATTRIB->TEXT so axis labels survive)
- assemble_campus.py: manifest-driven campus assembly with mandatory
  neighbour-gap gate (overlap = exit 3, 0.1-0.3m flagged as expansion joints)
- site_context_from_dump.py: site-context floors (ground/roads/parking/
  fence/trees/context massings) from site-plan dumps
- write_offline_viewer.py + assets/offline-viewer-libs/: fully-offline
  single-file viewer (vendored three r147 + pako, gzip-embedded GLB)
- audit: clip-scoped coverage figures; report: multi_frame_sheet warning;
  audit gate floors_aligned catches the diagonal-staircase failure mode

Mac round:
- build_blender_showcase.py now honors slab_bounds_fallback and prefers
  footprint polygons for generated roofs (bounds rects made roof plates jut
  past the facade and buried campuses under full-extent slabs); contract now
  matches spec_to_glb.py exactly
- merge_wall_solids (default off) in BOTH backends: shapely union in
  spec_to_glb.py, native delaunay_2d_cdt union in Blender; endpoint-shared
  wall ends pre-extended w/2 so L-corners close seamlessly (flat caps leave
  a notch a union alone cannot fill) while openings stay flat
- glazing_mullions (default off): curtain-wall panel grid (verticals every
  glazing_panel_w + floor-line transoms) as pseudo wall segments in the
  <floor>__walls node; glass pane kept
- build_showcase_variants.py keeps source_file=="site" floors intact in all
  variants (roads/trees live on filtered categories)
- web template: instanced low-poly trees from metadata site_trees,
  grade-level shadow catcher (was at basement depth), data-URI favicon
- tools/compress.mjs deps pinned (package.json); 15MB campus GLB -> 0.57MB
- tests: 24 -> 52 checks (wall union, mullions, byte-identical defaults)

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-02 17:44:41 +08:00
a6ac166049 Initial commit: cad-building-showcase skill
Agent-led CAD-drawing → 3D web showcase pipeline. Inspects CAD reports,
maps layers/floors, extracts a normalized building spec (with block-probed
glazing and audit gates), builds Blender/trimesh GLB variants, and assembles
a Three.js web viewer. Includes XREF-shell detection and a regression test.

Large inputs/outputs (work/, outputs/, source_cad/, renders) are gitignored.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-12 16:16:04 +08:00